Power CUTTER MICRO
Extreme manoeuvrable milling robot for lateral connections
- DN 70 to DN 200 (from DN 150 with guide rails).
- Bend capability of 90° in a DN 100 pipe!
- Access possible through a DN 100 inspection cover.
- Position capable through a DN 70/45° arm.
- High performing pneumatic drill head.
- Manual positioning with spring/push rods (axial and radial).
- No electronic parts in the construction.
- Sturdy and maintenance free.
- Simplicity, easy to use.
- Minimal investment.
Technical Data
Mill Head: | Corrosion free, stable stainless steel casing, high performance milling motor with hard metal granulate milling head DN 40. |
---|---|
Control: | Pneumatic control unit (milling arm raising/lowering) made completely from stainless steel, milling motor on/off switch. |
Hose package: | 10.94 yd Control hose and air supply for milling motor inclusive connections. |
Positioning: | 6.02 yd push rods
6.02 yd push spirals |
Transport and packaging: | Durable plastic box including set assembly accessories and carry case. |
Technical modifications reserved.